<?xml version="1.0" encoding="utf-8"?>
<ModelLabAnalogEntries>
  <Supplier>New Ancorvis srl</Supplier>
  <DisplayInformation>NewAncorvis_Direct_ANALOG</DisplayInformation>
  <LabAnalogs>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>A-350863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_ALP-INT : CHC32535* : *</string>
        <string>NewAncorvis_Direct_BNR-ALL : TopDM354050* : *</string>
        <string>NewAncorvis_Direct_BIC-DEN : 20* : *</string>
        <string>NewAncorvis_Direct_BIO-MOR : 3540* : *</string>
        <string>NewAncorvis_Direct_BMT-3IC : 34* : *</string>
        <string>NewAncorvis_Direct_BMT-3IE : 34* : *</string>
        <string>NewAncorvis_Direct_BTCH-KON : 36424854* : *</string>
        <string>NewAncorvis_Direct_CMLG-IS : 384450* : *</string>
        <string>NewAncorvis_Direct_DSPL-AN : 35455570* : *</string>
        <string>NewAncorvis_Direct_DSPL-AS : TX3540* : *</string>
        <string>NewAncorvis_Direct_DSPL-AS : EV30* : *</string>
        <string>NewAncorvis_Direct_DSPL-AS : EV36* : *</string>
        <string>NewAncorvis_Direct_DSPL-FR : 34* : *</string>
        <string>NewAncorvis_Direct_DSPL-XI : 34* : *</string>
        <string>NewAncorvis_Direct_ETK-NAT : 36465260* : *</string>
        <string>NewAncorvis_Direct_GEA-ALL : WaymiX343845* : *</string>
        <string>NewAncorvis_Direct_GEA-ALL : WayMilano3438* : *</string>
        <string>NewAncorvis_Direct_GEA-ALL : Kentron34* : *</string>
        <string>NewAncorvis_Direct_GEA-ALL : Venezia34* : *</string>
        <string>NewAncorvis_Direct_IDI-STO : 35* : *</string>
        <string>NewAncorvis_Direct_INT-ONE : MUA35* : *</string>
        <string>NewAncorvis_Direct_LEA-INT : 35* : *</string>
        <string>NewAncorvis_Direct_MCH-HUM : Shard3438* : *</string>
        <string>NewAncorvis_Direct_MED-ICX : 3453754148* : *</string>
        <string>NewAncorvis_Direct_MEG-ANY : STMini35* : *</string>
        <string>NewAncorvis_Direct_NDN-INT : MUAGMMicroAbutment35* : *</string>
        <string>NewAncorvis_Direct_NDN-MUA : GMMicroAbutment35* : *</string>
        <string>NewAncorvis_Direct_NOB-ACT : NP35* : *</string>
        <string>NewAncorvis_Direct_NOB-BRK : NP34* : *</string>
        <string>NewAncorvis_Direct_OSS-ALL : Mini35* : *</string>
        <string>NewAncorvis_Direct_PRO-PER : 33* : *</string>
        <string>NewAncorvis_Direct_RES-INT : IKIC35* : *</string>
        <string>NewAncorvis_Direct_SHU-DIA : Mini35* : *</string>
        <string>NewAncorvis_Direct_SM-KOHN : 33* : *</string>
        <string>NewAncorvis_Direct_SM-PRM : 33* : *</string>
        <string>NewAncorvis_Direct_SOU-IMP : ExternalHex325* : *</string>
        <string>NewAncorvis_Direct_SOU-IMP : DeepConical3540* : *</string>
        <string>NewAncorvis_Direct_TEK-INK : 35404555* : *</string>
        <string>NewAncorvis_Direct_ZIM-3IC : 34* : *</string>
        <string>NewAncorvis_Direct_ZIM-3IE : 34* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>A-350863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>A-350863-0.13.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_STR-BLX : RBWB3565* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>A-350863-0.13_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>A-350863-0.3.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_STR-TLX : NT35* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>A-350863-0.3_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>AA-460824.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_STR-ALL : MUASRA46* : *</string>
        <string>NewAncorvis_Direct_STR-MUA : SRA46* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>AA-460824_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>2</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>AB-340863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BTK-ALL : EN34* : *</string>
        <string>NewAncorvis_Direct_JD-INT : EvoS32* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>AB-340863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Ak-350863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_KEYS-PC : SD35* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Ak-350863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Aq-350884.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_STR-ALL : MUASRA35* : *</string>
        <string>NewAncorvis_Direct_STR-MUA : SRA35* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Aq-350884_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>2</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>B-411063.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BMT-3IC : 41* : *</string>
        <string>NewAncorvis_Direct_ZIM-3IC : 41* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>B-411063_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Bq-340844.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_MIS-C1I : Narrow330* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Bq-340844_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>4</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>C-410863-0.32.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_INT-INT : InDexST4043* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>C-410863-0.32_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>C-410863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BB-DUR : 3570* : *</string>
        <string>NewAncorvis_Direct_BMT-3IE : 41* : *</string>
        <string>NewAncorvis_Direct_BRD-SKY : Narrow35* : *</string>
        <string>NewAncorvis_Direct_BRD-SKY : Regular354045* : *</string>
        <string>NewAncorvis_Direct_BTI-EXT : 41* : *</string>
        <string>NewAncorvis_Direct_DIO-ALL : UFII3840455055* : *</string>
        <string>NewAncorvis_Direct_DNT-IMP : 36404550* : *</string>
        <string>NewAncorvis_Direct_GC-AAD : Regular40* : *</string>
        <string>NewAncorvis_Direct_GEA-ALL : Venezia41* : *</string>
        <string>NewAncorvis_Direct_GHI-EVO : 3540* : *</string>
        <string>NewAncorvis_Direct_IDI-STA : 40* : *</string>
        <string>NewAncorvis_Direct_IDI-STO : 40* : *</string>
        <string>NewAncorvis_Direct_JD-INT : Icon394350* : *</string>
        <string>NewAncorvis_Direct_KEYS-RE : 41* : *</string>
        <string>NewAncorvis_Direct_LEA-EXT : 41* : *</string>
        <string>NewAncorvis_Direct_LEA-INT : 40* : *</string>
        <string>NewAncorvis_Direct_MCH-HUM : Shard4350* : *</string>
        <string>NewAncorvis_Direct_MEG-ANY : Anyridge3540455055* : *</string>
        <string>NewAncorvis_Direct_NDN-INT : CM3550* : *</string>
        <string>NewAncorvis_Direct_NDN-INT : GM3570* : *</string>
        <string>NewAncorvis_Direct_NEB-IS : RegularWide4070* : *</string>
        <string>NewAncorvis_Direct_NEO-INT : SP3565* : *</string>
        <string>NewAncorvis_Direct_NewAncorvis : SlimFit41* : *</string>
        <string>NewAncorvis_Direct_NewEagleGrid : EagleGrid41NAAQA498 : *</string>
        <string>NewAncorvis_Direct_NOB-ACT : RP43* : *</string>
        <string>NewAncorvis_Direct_NOB-BRK : RP41* : *</string>
        <string>NewAncorvis_Direct_OSS-ALL : Regular445567* : *</string>
        <string>NewAncorvis_Direct_OXY-ALL : K1LineRegularWideCorePSK3555* : *</string>
        <string>NewAncorvis_Direct_PHI-ALL : TSHBNTS3S440* : *</string>
        <string>NewAncorvis_Direct_PPL-ALL : Torque40* : *</string>
        <string>NewAncorvis_Direct_PPL-ALL : MUA40* : *</string>
        <string>NewAncorvis_Direct_PRO-PER : 40* : *</string>
        <string>NewAncorvis_Direct_PRO-PER : TSConomet38424651* : *</string>
        <string>NewAncorvis_Direct_SHU-DIA : Regular4070* : *</string>
        <string>NewAncorvis_Direct_SM-OUTL : 41* : *</string>
        <string>NewAncorvis_Direct_SOU-IMP : ExternalHex37540* : *</string>
        <string>NewAncorvis_Direct_THO-SPI : 40* : *</string>
        <string>NewAncorvis_Direct_YOU-INT : VVLRegular4250* : *</string>
        <string>NewAncorvis_Direct_ZIM-3IE : 41* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>C-410863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>CC-400863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BIO-IMP : CoreV238424555* : *</string>
        <string>NewAncorvis_Direct_BTK-ALL : IR325375* : *</string>
        <string>NewAncorvis_Direct_DTS-ALL : SClean3760* : *</string>
        <string>NewAncorvis_Direct_FUT-IMP : F1F23338425060* : *</string>
        <string>NewAncorvis_Direct_MIS-CON : 40* : *</string>
        <string>NewAncorvis_Direct_NOR-MED : 3360* : *</string>
        <string>NewAncorvis_Direct_OXY-ALL : CLASSICLineINT40* : *</string>
        <string>NewAncorvis_Direct_RES-INT : IKIC40* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>CC-400863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Ck-410863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_KEYS-PC : RD41* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Ck-410863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Cq-400884.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_MEG-ANY : BlueDiamondNC3337* : *</string>
        <string>NewAncorvis_Direct_OXY-MUA : FixoMini40* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Cq-400884_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>4</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Cq-400884-0.3.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_ADV-ALL : MUAGFA40* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Cq-400884-0.3_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>8</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Cq-400884-0.9.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_MEG-ANY : OctaAbutment38* : *</string>
        <string>NewAncorvis_Direct_MEG-MUA : OctaAbutment38* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Cq-400884-0.9_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>8</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>D-501063.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BMT-3IC : 50* : *</string>
        <string>NewAncorvis_Direct_GHI-EVO : 50* : *</string>
        <string>NewAncorvis_Direct_ZIM-3IC : 50* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>D-501063_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>E-501033-AQ.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_CMLG-SL : 50* : *</string>
        <string>NewAncorvis_Direct_NOB-REP : WP50* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>E-501033-AQ_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>3</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>EE-540863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_PRO-PER : MUAFast54* : *</string>
        <string>NewAncorvis_Direct_TEK-INK : PilastroConicoTwinKon54* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>EE-540863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>F-500863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BB-MUA : MUA50* : *</string>
        <string>NewAncorvis_Direct_BMT-3IE : 50* : *</string>
        <string>NewAncorvis_Direct_EDR-PRI : MUAdiritto50per3754245* : *</string>
        <string>NewAncorvis_Direct_EDR-PRI : MUAinclinato50per37542* : *</string>
        <string>NewAncorvis_Direct_GEA-ALL : Venezia50* : *</string>
        <string>NewAncorvis_Direct_IDI-STA : 50* : *</string>
        <string>NewAncorvis_Direct_IDI-STO : 50* : *</string>
        <string>NewAncorvis_Direct_IMP-DIR : MUA50* : *</string>
        <string>NewAncorvis_Direct_INT-ONE : MUA50* : *</string>
        <string>NewAncorvis_Direct_LEA-EXT : 50* : *</string>
        <string>NewAncorvis_Direct_LEA-INT : 50* : *</string>
        <string>NewAncorvis_Direct_MIS-C1I : Wide50* : *</string>
        <string>NewAncorvis_Direct_NOB-ACT : WP55* : *</string>
        <string>NewAncorvis_Direct_NOB-BRK : WP50* : *</string>
        <string>NewAncorvis_Direct_PHI-ALL : TSHBNTS550* : *</string>
        <string>NewAncorvis_Direct_PPL-ALL : Standard50* : *</string>
        <string>NewAncorvis_Direct_PPL-ALL : MUA50* : *</string>
        <string>NewAncorvis_Direct_PRO-PER : 50* : *</string>
        <string>NewAncorvis_Direct_SM-KOHN : 50* : *</string>
        <string>NewAncorvis_Direct_SM-OUTL : 50* : *</string>
        <string>NewAncorvis_Direct_SM-PADM : 50* : *</string>
        <string>NewAncorvis_Direct_SOU-IMP : ExternalHex50* : *</string>
        <string>NewAncorvis_Direct_SM-SHEL : 50* : *</string>
        <string>NewAncorvis_Direct_THO-SPI : 50* : *</string>
        <string>NewAncorvis_Direct_ZIM-3IE : 50* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>F-500863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>FF-520863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_WIN-TTI : EAMUAperTTi52* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>FF-520863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>FH-550863-0.5.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BIO-HIN : TissueLevel45* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>FH-550863-0.5_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Fk-500863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_KEYS-PC : WD50* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Fk-500863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>FN-531063.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_NOB-ONE : RP53* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>FN-531063_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Fp-500663-2.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_SM-PRM : 50* : *</string>
        <string>NewAncorvis_Direct_SM-PRM : IN5005mm* : *</string>
        <string>NewAncorvis_Direct_SM-PRM : IN5015mm* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Fp-500663-2_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>G-331033-AQ.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_CMLG-SL : 33* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>G-331033-AQ_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>3</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>GG-330833-0.2.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_DSPL-CON : AcurisSMALL33* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>GG-330833-0.2_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>3</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>H-330863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BIO-HIN : 30* : *</string>
        <string>NewAncorvis_Direct_BRD-SKY : Copa3560* : *</string>
        <string>NewAncorvis_Direct_BTCH-KON : 30* : *</string>
        <string>NewAncorvis_Direct_BTK-ALL : KR33374148* : *</string>
        <string>NewAncorvis_Direct_DIO-ALL : UFIINarrow3033* : *</string>
        <string>NewAncorvis_Direct_DSPL-FR : 30* : *</string>
        <string>NewAncorvis_Direct_DSPL-XI : 30* : *</string>
        <string>NewAncorvis_Direct_DTK-INT : 325* : *</string>
        <string>NewAncorvis_Direct_JD-INT : IconUltraS275* : *</string>
        <string>NewAncorvis_Direct_MED-ICX : Narrow33* : *</string>
        <string>NewAncorvis_Direct_MIS-SEV : Narrow330* : *</string>
        <string>NewAncorvis_Direct_NEO-INT : NP325* : *</string>
        <string>NewAncorvis_Direct_NOB-ACT : 30* : *</string>
        <string>NewAncorvis_Direct_PI-BRK : MorseTaper354151* : *</string>
        <string>NewAncorvis_Direct_PLT-INT : IH325* : *</string>
        <string>NewAncorvis_Direct_PHI-ALL : TSHBNTS233* : *</string>
        <string>NewAncorvis_Direct_SM-OUTL : 33* : *</string>
        <string>NewAncorvis_Direct_WIN-TTI : 33Slim* : *</string>
        <string>NewAncorvis_Direct_WIN-TTI : 33* : *</string>
        <string>NewAncorvis_Direct_ZIM-ALL : Eztetic31* : *</string>
        <string>NewAncorvis_Direct_ZIM-EZT : 31* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>H-330863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>HA-340863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_DRM-ALL : TwinfitS33* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>HA-340863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>1</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Hh-3372563-075.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_WIN-TTI : 29Slim* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Hh-3372563-075_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Hq-330833.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_CMLG-CO : 33* : *</string>
        <string>NewAncorvis_Direct_EDR-PRI : 33* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Hq-330833_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>3</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>I-381033-AQ.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_CMLG-SL : 38* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>I-381033-AQ_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>3</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>J-330844.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_STR-ALL : BoneNC33* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>J-330844_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>4</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>JJ-330844-0.93.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_DSPL-CON : StandardAbutmentNAAQA492A1024 : NoRoth4a</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>JJ-330844-0.93_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>4</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>K-380833.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_CMLG-CO : 3843* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>K-380833_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>3</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Lp-380663-2.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_SM-PRM : 38* : *</string>
        <string>NewAncorvis_Direct_SM-PRM : IN3805mm* : *</string>
        <string>NewAncorvis_Direct_SM-PRM : IN3815mm* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Lp-380663-2_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>L-380863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_3P-CON : 38455262* : *</string>
        <string>NewAncorvis_Direct_ALP-INT : CS374250* : *</string>
        <string>NewAncorvis_Direct_BEG-SEM : 325375* : *</string>
        <string>NewAncorvis_Direct_BIC-DEN : 25* : *</string>
        <string>NewAncorvis_Direct_BIO-HIN : 35* : *</string>
        <string>NewAncorvis_Direct_BLG-INT : 38* : *</string>
        <string>NewAncorvis_Direct_BMX-ALL : UnimaxFirst3337542* : *</string>
        <string>NewAncorvis_Direct_DSPL-FR : 38* : *</string>
        <string>NewAncorvis_Direct_DSPL-XI : 38* : *</string>
        <string>NewAncorvis_Direct_DTK-INT : 375* : *</string>
        <string>NewAncorvis_Direct_FMD-UNQ : 3455* : *</string>
        <string>NewAncorvis_Direct_GEA-ALL : Kentron38* : *</string>
        <string>NewAncorvis_Direct_IRE_ALL : iMAXNHSIShapeOneB37552* : *</string>
        <string>NewAncorvis_Direct_JD-INT : EvoPlus3760* : *</string>
        <string>NewAncorvis_Direct_LAS-ALL : BioniQQR354050* : *</string>
        <string>NewAncorvis_Direct_LEA-MC : 36* : *</string>
        <string>NewAncorvis_Direct_LEA-MED : TiSmart354048* : *</string>
        <string>NewAncorvis_Direct_LEA-MED : ILWIDE38* : *</string>
        <string>NewAncorvis_Direct_MIS-C1I : Standard375420* : *</string>
        <string>NewAncorvis_Direct_MIS-SEV : Standard375420* : *</string>
        <string>NewAncorvis_Direct_NRM-ALL : 2PRegular37542550* : *</string>
        <string>NewAncorvis_Direct_PRO-PER : 36* : *</string>
        <string>NewAncorvis_Direct_SM-CSRD : 384250* : *</string>
        <string>NewAncorvis_Direct_SM-KOHN : 38* : *</string>
        <string>NewAncorvis_Direct_SM-SHEL : 33* : *</string>
        <string>NewAncorvis_Direct_SM-SHEL : 38* : *</string>
        <string>NewAncorvis_Direct_TAG-DEN : 375425060* : *</string>
        <string>NewAncorvis_Direct_THO-SPI : 35* : *</string>
        <string>NewAncorvis_Direct_VEC-INT : 33374150* : *</string>
        <string>NewAncorvis_Direct_WIN-TTI : 38* : *</string>
        <string>NewAncorvis_Direct_YOU-INT : IIL3754250* : *</string>
        <string>NewAncorvis_Direct_YOU-INT : VVLNarrow33375* : *</string>
        <string>NewAncorvis_Direct_ZIM-ALL : ScrewVent37541* : *</string>
        <string>NewAncorvis_Direct_ZIM-SCR : 37541* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>L-380863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>M-431033-AQ.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_CMLG-SL : 43* : *</string>
        <string>NewAncorvis_Direct_NOB-REP : RP43* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>M-431033-AQ_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>3</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>MM-4250863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_SM-SHEL : 425* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>MM-4250863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>MN-440863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_EDR-PRI : MUAdiritto44per33* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>MN-440863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>N-450863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_AON-INT : 3350* : *</string>
        <string>NewAncorvis_Direct_BLG-INT : 45* : *</string>
        <string>NewAncorvis_Direct_BLG-INT : MUA45* : *</string>
        <string>NewAncorvis_Direct_CWM-MUA : MultiSA45* : *</string>
        <string>NewAncorvis_Direct_DSPL-AS : EV42* : *</string>
        <string>NewAncorvis_Direct_DSPL-FR : 45* : *</string>
        <string>NewAncorvis_Direct_DSPL-XI : 45* : *</string>
        <string>NewAncorvis_Direct_GEA-ALL : Kentron45* : *</string>
        <string>NewAncorvis_Direct_MIS-SEV : Wide500600* : *</string>
        <string>NewAncorvis_Direct_PRO-PER : 45* : *</string>
        <string>NewAncorvis_Direct_SM-KOHN : 425* : *</string>
        <string>NewAncorvis_Direct_WIN-TTI : 45* : *</string>
        <string>NewAncorvis_Direct_ZIM-ALL : MUAACTR45* : *</string>
        <string>NewAncorvis_Direct_ZIM-MUA : ACTR45* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>N-450863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>NH-450863-0.5.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BIO-HIN : TissueLevel35* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>NH-450863-0.5_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Nq-450844.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_EDR-PRI : 45* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Nq-450844_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>4</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>NN-450833-0.17.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_DSPL-CON : AcurisLARGE45* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>NN-450833-0.17_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>3</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>NX-450863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_DRM-ALL : TwinfitL4855* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>NX-450863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>1</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>OO-490863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_IDI-STO : MUA49* : *</string>
        <string>NewAncorvis_Direct_IDI-MUA : BaseConica49* : *</string>
        <string>NewAncorvis_Direct_SHA-SK : 3754049* : *</string>
        <string>NewAncorvis_Direct_SHA-SK : MUA49* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>OO-490863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>O-480863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_ANTH-AX : MultiUnitAbutment48* : *</string>
        <string>NewAncorvis_Direct_BB-MUA : Profile1MonconeCIA48* : *</string>
        <string>NewAncorvis_Direct_BLG-INT : MonconeMUADritto48* : *</string>
        <string>NewAncorvis_Direct_BMT-3IC : MUALowProfile48* : *</string>
        <string>NewAncorvis_Direct_BIO-HIN : 45* : *</string>
        <string>NewAncorvis_Direct_DSPL-AS : EV48* : *</string>
        <string>NewAncorvis_Direct_DSPL-AS : MUAAstratechMultiBaseEV48* : *</string>
        <string>NewAncorvis_Direct_DSPL-XI : MUAMPTG48* : MetalRot</string>
        <string>NewAncorvis_Direct_DSPL-XI : MUAMPTG48* : MetalRotFAS</string>
        <string>NewAncorvis_Direct_DTK-INT : MUA48perImplassicFTPFTKHX3* : *</string>
        <string>NewAncorvis_Direct_ETK-NAT : MUATetra48* : *</string>
        <string>NewAncorvis_Direct_EVR-MUA : 48* : MetalRot*</string>
        <string>NewAncorvis_Direct_JD-INT : MUA48* : *</string>
        <string>NewAncorvis_Direct_MCH-HUM : MUA48* : *</string>
        <string>NewAncorvis_Direct_MDK-MUA : MultiunitAbutment48* : *</string>
        <string>NewAncorvis_Direct_MED-MUA : ICXMULTI48* : *</string>
        <string>NewAncorvis_Direct_MET-MUA : TAG48* : *</string>
        <string>NewAncorvis_Direct_MIS-SEV : MultiUnit48* : *</string>
        <string>NewAncorvis_Direct_MIS-MUA : 48* : *</string>
        <string>NewAncorvis_Direct_NEB-IS : MUA48* : *</string>
        <string>NewAncorvis_Direct_NDN-INT : MUAGMMiniConicalAbutment48* : *</string>
        <string>NewAncorvis_Direct_NDN-INT : MUAGMExactAbutment48* : *</string>
        <string>NewAncorvis_Direct_NDN-MUA : GMMiniConicalAbutment48* : *</string>
        <string>NewAncorvis_Direct_NDN-MUA : GMExactAbutment48* : *</string>
        <string>NewAncorvis_Direct_NewAncorvis : MUA48* : *</string>
        <string>NewAncorvis_Direct_NOB-BRK : MUA48* : *</string>
        <string>NewAncorvis_Direct_NOB-MUA : 48* : *</string>
        <string>NewAncorvis_Direct_OSS-MUA : MultiAbutment48* : *</string>
        <string>NewAncorvis_Direct_THO-SPI : 45* : *</string>
        <string>NewAncorvis_Direct_WIN-IMP : MUA48* : *</string>
        <string>NewAncorvis_Direct_WIN-TTX : EAMUAperTTx48* : *</string>
        <string>NewAncorvis_Direct_ZIM-ALL : ScrewVent47* : *</string>
        <string>NewAncorvis_Direct_ZIM-SCR : 47* : *</string>
        <string>NewAncorvis_Direct_ZIM-MUA : LowProfile48* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>O-480863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>ON-481063.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_NOB-ONE : NP48* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>ON-481063_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Oq-480884.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_SM-PADM : PADr48* : *</string>
        <string>NewAncorvis_Direct_OXY-MUA : FixoMini48* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Oq-480884_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>4</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>P-480884-0.55.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_MEG-ANY : OctaAbutment48* : *</string>
        <string>NewAncorvis_Direct_MEG-MUA : OctaAbutment48* : *</string>
        <string>NewAncorvis_Direct_STR-ALL : TissueRN48* : *</string>
        <string>NewAncorvis_Direct_STR-ALL : MUASynOcta48* : *</string>
        <string>NewAncorvis_Direct_STR-MUA : SynOcta48* : *</string>
        <string>NewAncorvis_Direct_ZIM-ALL : SwissPlus48* : *</string>
        <string>NewAncorvis_Direct_ZIM-SWI : 48* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>P-480884-0.55_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>8</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Pe-480863-0.55.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_STR-TLX : RT48* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Pe-480863-0.55_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Q-650884-0.75.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_STR-ALL : TissueWN65* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Q-650884-0.75_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>8</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Qe-650863-0.75.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_STR-TLX : WT65* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Qe-650863-0.75_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>QH-670863-0.5.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BIO-HIN : TissueLevel57* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>QH-670863-0.5_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>QQ-600884-0.5.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_OSS-ALL : SSComOctaP60* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>QQ-600884-0.5_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>8</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>R-451063.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_DSPL-AS : TX4550* : *</string>
        <string>NewAncorvis_Direct_SOU-IMP : DeepConical50* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>R-451063_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>RN-460863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_NEO-INT : MUA46* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>RN-460863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>RR-470863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_TEK-INK : PilastroConicoInclinato47* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>RR-470863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Rt-470833.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_ALP-INT : MUATCTN47* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Rt-470833_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>3</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Sp-430663-2.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_SM-PRM : 425* : *</string>
        <string>NewAncorvis_Direct_SM-PRM : IN42505mm* : *</string>
        <string>NewAncorvis_Direct_SM-PRM : IN42515mm* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Sp-430663-2_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>S-430863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_ALP-INT : IH33375425060* : *</string>
        <string>NewAncorvis_Direct_AZ-MEDI : DA0443* : *</string>
        <string>NewAncorvis_Direct_MEG-ANY : Anyone40455060* : *</string>
        <string>NewAncorvis_Direct_TEK-INK : PilastroConicoDritto43* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>S-430863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>S-4307563.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_MEG-ANY : Anyone35* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>S-4307563_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>S-4307563-0.5.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_NewEagleGrid : EagleGridVer2041NAAQA498 : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>S-4307563-0.5_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>T-410844.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BTI-INT : 41* : *</string>
        <string>NewAncorvis_Direct_STR-ALL : BoneRC41* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>T-410844_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>4</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>U-380884.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_ADV-ALL : GTBOneConical3350NAAQA180* : *</string>
        <string>NewAncorvis_Direct_EDR-PRI : 375* : *</string>
        <string>NewAncorvis_Direct_MEG-ANY : BlueDiamondRC4163* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>U-380884_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>4</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>V-430884-0.5.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_INT-GOL : 32537540* : *</string>
        <string>NewAncorvis_Direct_INT-GOL : 47560* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>V-430884-0.5_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>8</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Y-350833-AQ.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_ANTH-AX : 34404652* : *</string>
        <string>NewAncorvis_Direct_NOB-REP : NP35* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Y-350833-AQ_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>3</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>X-360863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_DSPL-AS : MUAAstratechUniAbutmentEV36* : *</string>
        <string>NewAncorvis_Direct_GC-AAD : Narrow33* : *</string>
        <string>NewAncorvis_Direct_PLT-INT : CC3253754250* : *</string>
        <string>NewAncorvis_Direct_SHA-SK : 3336* : *</string>
        <string>NewAncorvis_Direct_SHA-SK : MUA36* : *</string>
        <string>NewAncorvis_Direct_OSTEO-TI : MetalEzeeCombiMini375* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>X-360863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>XL-370863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_DRM-ALL : TwinfitM3742* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>XL-370863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>1</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>W-420863.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_BIC-DEN : 30* : *</string>
        <string>NewAncorvis_Direct_DSPL-AN : BalanceBaseAbutmentNarrow42* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>W-420863_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>6</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Wq-420844.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_EDR-PRI : 42* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Wq-420844_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>4</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
    <ModelLabAnalogEntry>
      <RetentionMeshType>
        <ModelLabAnalogRetentionFile>Z-380884-0.57.stl</ModelLabAnalogRetentionFile>
      </RetentionMeshType>
      <CompatibleImplants>
        <string>NewAncorvis_Direct_INT-INT : InDexSQ3337* : *</string>
      </CompatibleImplants>
      <ModelLabAnalogFile>Z-380884-0.57_an.stl</ModelLabAnalogFile>
      <RotationalSymmetry>8</RotationalSymmetry>
      <OffsetMethod>RadialOffset</OffsetMethod>
      <OffsetMaximum>0.5</OffsetMaximum>
      <OffsetMinimum>-0.5</OffsetMinimum>
      <OffsetProvided>0</OffsetProvided>
    </ModelLabAnalogEntry>
  </LabAnalogs>
</ModelLabAnalogEntries>